Lowest Price of the Year

Microwavable Shoulder Herbal Heat Wrap
$19.99
|
| Aqua-Aire Comfort System ™ 21" D X 19" W X 2"-3" H." inflated Lifetime Warranty: Repair or replace at our option. Weight Limit 348lbs. HERE ARE SOME HELPFUL TIPS ON THE PROPER FILLING AND USES: WATER/AIR INFLATION INSTRUCTIONS: 1. Remove inflatable from packaging. Open large water filler valve located at center of inflatable. 2. Squeeze base of valve while pulling plastic material on bottom of inflatable away from filler opening, this will allow for a proper flow of water while filling. 3. Place large water opening firmly against faucet to make a tight fit. Turn on flow of water to a steady steam. You may have to increase the flow of water as the inflatable fills up. 4. Open air valve (smaller of two) on side to allow pressure to escape. After water has been filled - close cap tightly. Force air into smaller air valve with mouth to continue filling. Close cap tightly. 5. Recommended inflation with water not to exceed 50% for maximum comfort. Approximately 1/2 gallon. Total weight when filled should be 5-8lbs. 6. For firm support Fill 1/2 with cold- warm tap water and firmly fill with air. (You may also fill entire inflatable with air alone) 7. For medium support fill ¾ with cold- warm tap water and loosely fill with air. 8. For soft support fill ½ with cold- warm tap water and loosely fill with air. 9. Do not over-inflate. Do not attempt to remove every wrinkle from inflatable. Experiment to find your exact comfort level. 10. Press closed air valve into inflatable to allow it to lay flat with surface. You may glue lid shut once you achieve desired inflation & do not wish to deflate. 11. Lay black outer cover face down on flat surface. Open zipper on bottom. Place half inch High Density Foam (included) into outer cover with U-shape aligned to outer cover U-shape. Place inflatable on top of foam in same manner with the filler valves facing you. Close zipper. Important: The U-Shape cut out is designed to relieve tail bone pressure. Set on the cushion with your tailbone aligned over cutout for maximum comfort and support. MAINTENANCE AND DEFLATION: 1. Open valves and empty into sink. 2. Towel dry. NOT A LIFE SAVING DEVICE WARNING: Do Not Freeze. The inflatable must be at room temperature before filling with water/air, because you may otherwise risk temperature shock and can become defective. In outdoor use, 10 ounces of Isopropyl alcohol may be added to avoid freezing. Sit on cushion enclosed in carrying bag for outdoor use. LAUNDRY INSTRUCTIONS: Most spills can be wiped up with a damp cloth. After removing foam and vinyl insert, hand wash in cold water and line dry recommended. |
Material contents:
All new material consisting of polyester fiber.
Outer Cover Top: 95% Polyester 5% Cotton
Outer Cover Bottom: 100% Jersey
Foam Filling Sewn into Cover: All Polyester
Inflatable Insert: PVC Plastic
High Density Foam Insert: All Polyester
|
|
| FabFoot Massager | Figit for your Digit | Glide Ball |
|
$10.99 |
One Figit $2.99 |
![]() $17.99 |
Visitors: Log in to your account
Review our
Shipping, Return, Privacy policies and more before buying
Wholesale purchasing
Professional discount
Massagers, Herbal Heat Pillows, Back Braces, Orthopedic Supports and More Copy Right 2000-20008 Disclaimer.